Introduction
The 5x Inputs and 2x Outputs seamless multiview video switcher was developed for the purpose of multiple sources displayed on a single screen, supporting high input and output resolutions.
HDBaseT mirrored output port can be used for long distance video transmission
User can easily manage it via the front buttons, IR remoter or RS232 commands.
Application Field:
Home Theatre; Video Conference; Security Monitoring; Presentation and Broadcasting; Teaching System; Financial Stock Analysis; Game E-Sports; Medical Display.
- Inputs: 3x HDMI inputs, 1x DP, 1x USB-C ( video only)
Outputs: 1x HDMI, 1x HDBaseT,1x 3.5mm L/R output
- Support HDMI 2.0,HDCP 2.2, support video resolution up to 3840x2160@60
- Support 5 categories of multiview modes, SINGLE, PIP, PBP, 3xWIN, 4xWIN
- Seamless switching on single window display mode
Fast switching on non-single window display modes
- Extensive EDID and HDCP handle
- Support volume control and independently audio selection
Support LPCM, AC3, DD+, DTS, DTS-HD, up to 7.1 audio channel
- Support OSD navigation for advanced setting
- Provide 24V/10watt PSE ( POC ) for remote HDBaseT receiver power supply
- HDBaseT transmission length up to 70m @1080p, or 40m @4K
2. Panel Layout
Front
| Name | Description |
| HDMI 1 | Press HDMI 1 button to select HDMI 1 as the input source.
Long press it for 3 seconds to enter SINGLE mode,  .
SINGLE mode means only one display window on the screen
Note, when works on non-SINGLE mode, directly short press input buttons will be invalid. |
| HDMI 2 | Press HDMI 2 button to select HDMI 2 as the input source.
Long press it for 3 seconds to enter PIP Multiview mode,  . |
| HDMI 3 | Press HDMI 3 button to select HDMI 3 as the input source.
Long press it for 3 seconds to enter PBP Multiview mode,  . |
| DP | Press DP button to select DP as the input source.
Long press it for 3 seconds to enter 3xWIN mode,  .
3xWIN mode is Three Windows Multiview mode. |
| USB-C | Press USB-C button to select USB-C (video only) as the input
Long press it for 3 seconds to enter 4xWIN mode,  .
4xWIN mode is Four Windows Multiview mode. |
| WINDOW | Press this button, the screen will show up one yellow border on window 1. Continue press this button the border will be shown on window 2 or 3… then press one input button such as HDMI 1, and then HDMI 1 will displayed on the current selected window.
Long press this button for 3 seconds can select different output resolution with OSD information. |
Please note: Press HDMI 3 and DP at the same time can enable/disable AUTO SWITCH function when SINGLE window display mode
Rear
| Name | Description |
| HDBT out | HDBaseT Scaling output up to 3840x2160@60 |
| HDMI out | HDMI scaling output up to 3840x2160@60 |
| LR out | 3.5mm LR stereo audio output, 20Hz ~ 20kHz, 1.5Vrms max |
| INPUTs | HDMI 1, HDMI 2, HDMI 3, DP, USB-C |
| RS232 | External RS232 control
Default Baud Rate: 9600, Data Bits:8, Parity: None Stop Bits:1
3 way 3.5mm phoenix connector
  TX means Switcher PC; RX means Switcher PC
G means Ground
Baud Rate can be changed by OSD menu |
| 24V | 24V power adapter to plug in |
Side
USB-A port is here is only for firmware upgrade
| Number | Description |
| 1 | Return/Exit |
| 2 | Video input selection |
3 | OSD menu navigation
Menu (Enter),UP, DOWN,
LEFT,RIGHT |
| 4 | Multiview mode selection |
| 5 | Audio input selection |
| 6 | Reserved |
4. EDID and HDCP handle
User can select following EDID modes by RS232 command or OSD menu navigation
| Number | EDID mode | Number | EDID mode |
| 1 | 4K60-2.0CH | 10 | 1600x1200 |
| 2 | 4K60-5.1CH | 11 | 1440x900 |
| 3 | 4K30-2.0CH | 12 | 1360x768 |
| 4 | 4K30-5.1CH | 13 | 1280x1024 |
| 5 | 1080P-2.0CH | 14 | 1024x768 |
| 6 | 1080P-5.1CH | 15 | AUTO |
| 7 | 720P | 16 | 4K60-7.1CH |
| 8 | 1920x1200 | 17 | 4K30-7.1CH |
| 9 | 1680x1050 | 18 | 1080P-7.1CH |
| | | 19 | USER |
The HDMI output support 3 HDCP options: FORCE-1.4, FORCE-2.2, FORCE-OFF
User can select it by RS232 command
Product Tags:
|
|
Seamless UHD Video Switcher With Multiview 5x Inputs And 2x Outputs Images
|
